Kayayyaki
CE Atomatik Multihead Wanke Beads Ma'auni na sabulun wankan wanki pods pva wankan wanki Cika da tsarin shiryawa
Ƙayyadaddun fasaha
| Fitar da tsarin | ≥8.4Ton/Rana |
| Gudun tattarawa | 30-50Bags/min |
| Daidaiton tattarawa | ± 0.1-1.5g |
| Tsarin Aljihu | Bag mai lebur (hatimin gefe uku, hatimin gefe huɗu) jakar tsaye, jakar ɗaki na tsaye |
| Kayan jaka | M membrane, PE, PP Laminated fim, da dai sauransu |
Aikace-aikace
| Ya dace da auna kayan ciye-ciye irin su alewa, tsaba guna, jelly, daskararre, pistachio, gyada, goro, almonds, raisins, da sauransu. kuma ya dace da abinci mai kumbura;hardware, filastik mahadi da sauran granular, m, tsiri, zagaye da abin da ba na ka'ida ba. |
Fasali
1.Fully atomatik kammala dukan tsari na ciyarwa, aunawa, jakar cikawa, bugu na kwanan wata, ƙare samfurin fitarwa.
2.High daidaito da babban inganci.
3.Yi amfani da kayan aiki masu yawa.
4.For premade bags, da kyau kunshin.
5.A iri-iri na zaɓin na'urorin za a iya ƙara, kamar poke na'urar, vibration na'urar, jakar harbi na'urar, da dai sauransu.
Bayanin Samfura
| A'A. | Sunan Inji |
| 1 | Vibrator Feeder |
| 2 | Nau'in Z-Bucket Conveyor |
| 3 | Multihead Weigh |
| 4 | Dandalin Aiki |
| 5 | Injin shirya Jakar da aka riga aka yi |
| 6 | Mai Fitar da Fitowa |
Duba awo:Ƙin samfuran da ba su cancanta ba, zai iya rarraba samfurin kuma yayi ƙididdiga
Mai gano ƙarfe a kwance:Ana amfani da shi don gano karfen da ya gauraya yayin aikin samarwa.Ya dace don amfani bayan kammala marufi
Mai gano karfe da aka zubar:Ana amfani da shi don gano karfen da ya gauraya yayin aikin samarwa.Ya dace a yi amfani da shi kafin marufi.An shigar da shi tsakanin ma'aunin nauyi da injin marufi, ajiyar sarariMai gano ƙarfe haɗe da ma'aunin duba:Ana amfani da shi don gano ƙarfe da duba nauyi, haɗa ma'aunin cak tare da gano ƙarfe, ajiyewafarashi da ƙarancin ƙaddamarwa da lokacin kulawa
Teburin tattara Rotary:An yi amfani da shi don tattara samfuran daga layin samarwa, Ya dace da layin samarwa waɗanda ke buƙatar manual
sarrafawa ko jiran ƙarin ayyukan marufi.
Isar da kayan da aka gama:
Don isar da samfurin har zuwa layin tsari na gaba.
Tsarin Aiki
1.Materials ya kamata a cika a kan mai ba da jijjiga sannan a ɗaga shi ta nau'in bucket na nau'in Z zuwa saman ma'aunin ma'aunin kai da yawa.
2.The multihead awo za ta atomatik yin auna bisa ga saiti manufa nauyi.
3.Target nauyi samfurin drop ta makogwaro karfe injimin gano illa, da unqualified tare da karfe gurbatawa za a ƙi fita yayin da m ba tare da karfe za a cushe.
4.Product ba tare da gurbataccen ƙarfe ba za a jefa shi cikin jakar da aka riga aka yi kuma a rufe shi.
5.Finish kunshin za a isar don duba awo inda za a ƙi nauyin da bai cancanta ba yayin da masu cancanta za su wuce zuwa tabel na juyawa.